Natural and Sustainable Project
Wildlife Birdfeeder
What you will need :
• 2-liter plastic soda bottle with the plastic screw top in place
• A Hammer
• A Nail
• Duct Tape
• Wooden Dowel
• Funnel
• Bird Seed
• Twine or Hemp String
• Paints or permanent markers
What you need to do :
Using the hammer and the nail, punch two pencil-sized holes on opposite sides of the plastic soda bottle. Make sure you punch them, just before the curve of the bottle begins near the top. Push the wooden dowel through the holes to form a perch for the birds to sit while they eat from your feeder.
Next, punch two larger holes about 1 in half inches from the perch, just above where the birds will sit. Be sure and make these holes large enough for the birds to be able to pick out the bird seeds while they are eating, but not too large that the seed falls out.
Finally, Punch two to four more holes into the bottle of the soda bottle so you can be able to feed the twine through the holes and hang your feeder from a nearby tree. Once the holes in the bottom are made, feed the twine through. Kids can now help paint or use a permanent marker to place whatever they want to on the outside of the bottle. Once the paint is dry, place a small piece of duct tape over all the holes so you can feed the birdseed into the soda bottle through the top using the funnel. Once your birdseed is in, screw the top back on, flip upside down and hang your feeder outside and remove the duct tape.
*Natural and Sustainable Living Tip: Making more for the birds. Preparing nesting supplies for your local birds is such a simple process. All you need is a mesh cotton grocery bag and fill it with items such as shredded paper, fabric strips, cotton balls, feathers or batting. Dry grass or pine needles. Hang this in a spot that is out of the way of predators and is easy accessible to many birds.
Leave a Reply